|
High
Efficiency by Auto Feeders
Full
utilization of the capacity of the gathering and wire-stitching
machine DH2 cane achieved by connecting it with feeders operating
according to the roll-off principle. The gathering and
wire-stitching Model DH2 can be provided upto 4 auto-feeders.
If
the machine is to be used for hand feeding, the feeders have simply
to be swiveled back. These feeders are also suitable for polygraph
flow lines and can be attached without any modification.
Technical
Data
Sizes
(untrimmed)
|
Maximum with
non-staggered stitching
|
350 x 280 mm
|
|
Maximum with
staggered stitching
|
330 x 280 mm
|
|
Minimum
|
150 x 100 mm
|
Stapling
Devices
-
Stitching thickness 0-4 mm, back
length 16 mm, leg length 7 mm, for wire nos. 21-24
-
Stitching thickness 0-2 mm, back
length 12 mm, leg length 5 mm for wire nos 23-26
Distance
between staple centres: maximum 220 mm minimum 55 mm
Drive
Three-phase
squirrel cage motor 400/440/V, 50Hz, 1500 r.p.m
Upto
4 stations without autoamtic feeders 1 kw
The
drive is effected through a wedgebelt gear with inflnitely variable
speed regulation.
The
electric control devices are installed centrally, on main machine
One
vacuum pump for every two feeders, power required about 2.2 kw.
|
